epD‐BfS‐ () Environmental Product  Schweizerischer ingenieur‐ und Architektenverein (SiA). () Merkblatt energieausweis für Gebäude gemäß Sn en und Sn en zurich.  Schweizerischer . Flash point: > 21° C „Beschichtung auf Zink und verzinktem Stahl“ from Bundesausschuss Farbe und Sachwertschutz (BFS) according to Merkblatt 5 of BFS. Flash point: > 21° C. Solid substance: approx. 55% Zinc and galvanized surfaces are to be prepared according to Merkblatt 5 of. BFS. Clean the surfaces to be painted and remove dirt of all kinds, including dust, mortar droppings, and similar.
|Published (Last):||3 July 2013|
|PDF File Size:||6.30 Mb|
|ePub File Size:||10.89 Mb|
|Price:||Free* [*Free Regsitration Required]|
Provide for an evenly absorbent substrate to achieve uniform surfaces without shade variations. Which AV revolution bfe updated? Clean by suitable means, e. Prime chalking, sanding, absorbent surfaces with AmphiSilan-Putzfestiger. SP-Befragung zum Verkehrsverhalten. If brownish discolouration appears on the intermediate coat, apply the anhydrous, solvent-based facade paint Duparol for finishing coat.
Unstable Mineral Paint Coatings: City form and its macroscopic fundamental diagram [Presentation]. The fact that the model only needs a multimodal network to model the transport supply makes it independent of path sampling algorithms for the choice-set construction and it thus provides an alternative to classic mode and route choice models, since it can estimate mode and route choice parameters with directly observed routes, removing the sampling bias.
Thus this paper demonstrates the need for refinement of the definition of such a VTT. In case of direct reworking, all traces of additives must be pre-wetted and completely removed after merlblatt short reaction time.
In case of contact with eyes or skin, immediately and thoroughly rinse with water. If swallowed, seek medical advice immediately and show the container or label intestinal bacteria can be affected.
With integrated Nano-Quartz Matrix Structure. Determine the exact amount of material required by coating a test area on site. The quality of the dried coating will not be affected by these changes. Method of Application Apply with paint brush or roller.
Therefore a durable protection cannot be guaranteed. We show that intermodal travel is mostly associated with ownership of transit subscriptions, which allow free at the point-of-use public transportation.
Apply with paint jerkblatt or roller. Allow to dry thoroughly. Highly weather-resistant and non-fading. Technical Assistance As it is impossible to list herein the wide variety of substrates and their specific problems, please request our technical assistance in merkhlatt of queries.
In case of moist weather conditions rain, dew, fog yellowish transparent traces of additives, showing a slightly glossy shine and stickiness, may occur on the surface of compact, cool substrates or by means of delayed drying caused by the weather.
Technical Assistance As it is impossible to list herein the wide variety of substrates and their specific problems, please request our technical assistance in case of queries.
Do not apply on horizontal surfaces exposed to rain or moisture. Allow to dry thoroughly. Also suitable for the protection of substrates against environmental effects and aggressive airborne pollutants.
PermaSilan NQG is provided with a preservative against deterioration in the coating film due to algae and fungal attack. Using a joint merkblaht including all relevant fbs situations, this paper investigates the difference in the valuation of time coming from different kind of choice experiments. Please refer to our Disbon program for the renovation of unstable AAC coatings. Determine the exact amount of material required by coating a test area on site. Lower temperatures and higher humidity extend the drying time.
An additional priming coat of CapaGrund Universal must be applied. It is therefore advisable to apply a first coat in a similar hiding pastel tint, based on white. Permeable to CO 2 Resistant to aggressive air pollutants. Observe a minimum drying time of 12 hours between coats. Contains 1,2-benzisothiazol-3 2H -one, 2-methyl-2H-isothiazolone. Reduces visible marks on dark colours, if surfaces are subjected to mechanical loads. Substrate Preparation Exterior Renders: Facade plates, also if covering some levels of scaffolding, are to be coated plate by plate wet on wet and evenly rolled over in one direction to avoid the forming of different textures, which may be visible in adverse lighting conditions grazing light.
Person Detail – Institute of Science, Technology and Policy | ETH Zurich
Do not apply on horizontal surfaces exposed to rain or moisture. Traffic Systems Lecturer K. Coating of such surfaces must be considered a risk for which we cannot accept responsibility, since even after the most thorough treatment the efflorescence may recur.