ISO was prepared by Technical Committee ISO/TC 35, Paints and .. The test panels shall be dry and free of dust and any other foreign. ISO (E) ISO. Second edition. Paints and varnishes — Performance This is a free 6 page sample. Access the full version . Reference number. ISO (E) ISO. First edition. Paints and varnishes — Performance This is a free 6 page sample. Access.
|Published (Last):||12 August 2004|
|PDF File Size:||12.55 Mb|
|ePub File Size:||7.46 Mb|
|Price:||Free* [*Free Regsitration Required]|
Close attention needs dree be given to the execution of the work. Only new work and any repairs necessary before start-up are included. Method for the grading of surface profile of abrasive blast-cleaned steel — Comparator procedure ISO Under normal circumstances, neither the chemical composition of the individual paints in the paint system see 5.
The following information is required for each product: Application of paint system Trade name Batch number Temp.
Such information, and the detailed results of the assessment process, shall be the property of the purchaser but shall not be disseminated by the purchaser without prior agreement from the paint manufacturer. Unless otherwise agreed, condition the coated test dree for three weeks in accordance with ISO The maximum thickness of each coat on each panel shall be: If any pinholes are detected, the panels shall be replaced.
ISOIron oxide pigments for paints  Micaceous iron oxide: In order to establish sufficient corrosion protection and ensure optimum performance of the coating, it is necessary to specify the requirements for the protection paint system s along with the relevant laboratory performance tests to assess its uso likely durability.
If curing and conditioning are conducted under different conditions, they shall be clearly stated in the test report.
ISO environmental testing servicesAccelerated Weathering Laboratory
Optional tests may also be carried out, such as impact resistance, abrasion resistance and crack resistance. Draft International Standards adopted by the technical committees are circulated to the member bodies for voting.
Rust grades and preparation grades of uncoated steel substrates and of steel substrates after overall removal of previous coatings ISO Assessment after exposure testing h Panel No. Details of the software products used to create this PDF file can be found in the General Info relative to the file; the PDF-creation parameters were optimized for printing.
Freee structures oso exposed to environments of corrosivity category C5-M and immersion category Im2 as defined in ISO Table 3 is not intended to be comprehensive, nor is the intention that it be used as specification guidelines. The structure may be divided into four zones based on the type of 2340 each zone is exposed to: Such tests are subject to documentation forming part of the paint manufacturer’s quality assurance system and are used to provide the certificate of conformity, if required by the purchaser.
For twin-pack materials, the pot life shall not be exceeded. Make scribe lines of two different types as indicated below: Water immersion method ISO Every care has been taken to ensure that the file is suitable for use by ISO member bodies.
An example of a test report form is given in Annex C.
Table 2 kso Example sio a paint system description Manufacturer Type of substrate Type of environment Name: The binder properties infrared spectra and content of functional groups are determined after separation of the resin from the pigment and the kso. Alternative procedure without low-temperature exposure If specified, an alternative exposure cycle may be used.
The use of the alternative exposure cycle shall be indicated in the test report. If the alternative cycle is used, this shall be indicated in the test report see Clause 9.
The coating system shall be fully cured in accordance with the manufacturer’s frde recent instructions before testing starts. For dated references, only the edition cited applies. Surface preparation Length, width and thickness: An example of fingerprint testing is given in Annex B. In ISOrelevant requirements are given for the following: It should be emphasized that the paint systems given in Table 3 are made up of different generic types of intermediate-coat paint and topcoat paint.
In downloading this file, parties accept therein the responsibility of not infringing Adobe’s licensing policy. Methods and requirements are given in Table 5. An example of a paint system template is given in Table 2.
This International Standard places emphasis on high-durability paint systems, with the aim of minimizing maintenance, and hence reducing safety considerations and environmental impact. NOTE 2 Water-borne products have to be protected from freezing at all times during transportation and or storage. In order to achieve the same performance as indicated by testing, proper application of the paint is essential. The work of preparing International Standards is normally carried out through Feee technical committees.